This article explains different ways to connect HDMI over long distances. A great thing about HDMI is that you can pass both audio and video from a source such as a Blu-ray Disc player to a destination such as a home theater receiver or TV using a single cable.

However, HDMI has issues, such as occasional problems arising from its handshake requirements both the source and TV or video projector need to recognize each other for the connection to take. One additional problem with HDMI is its effectiveness over long distances. It is recommended that HDMI source and destination devices be no farther than 15 feet apart for the best result.

However, HDMI cables can extend this reliably to about 30 feet. Also, if well constructed and that doesn’t necessarily mean ultra-expensive , some HDMI cables can extend signal integrity up to 50 feet. Extending this distance can be tricky. You may see an effect known as the sparkles, and you may encounter increased handshake problems. Still, you may encounter those issues with short HDMI cable lengths.

So, what do you do if you want to extend that distance beyond 50 feet, as far as to feet, or your entire house so that HDMI devices can be sourced and destined in multiple locations?

These kits are available from brands such as Gofanco and Monoprice. This type of kit comes with a transmitter and receiver, both of which connect to AC power. Here are the steps to set this up. Place the transmitter and receiver where you want each device.

Connect one end of a Cat5e, 6, 7 cable to the Ethernet output of the transmitter. Connect the other end of the Cat cable to the Ethernet input on the receiver. Plug in the transmitter and receiver to power and verify that the setup works. If the setup doesn’t work, redo the connection setup or refer to our HDMI troubleshooting tips. If you aren’t successful, contact tech support for your converters. Fiber can extend HDMI over long distances such as a mile or more. The physical layout and setup are the same as with extenders that use Cat cables.

These cables work like any other HDMI cable. Plug one end into the source, the other end to a TV or video projector, and you are set to go. These cables come in various lengths.

Depending on the manufacturer, you may be able to order custom lengths. Optical HDMI cable technology supports lengths of feet or more.

Another way to connect HDMI devices is wirelessly. This solution can eliminate the need for a long HDMI cable within a large room, usually at a distance of 30 to 60 feet. Some units may provide up to feet or more of coverage. Wireless HDMI has mostly fallen out of favor.

You can still find devices that support it, but there’s no agreed-upon standard. The companies that produce the devices are doing so entirely on their own. Both of these formats have fallen out of favor, with both failing to gain traction as the standard. In their place, the companies that previously adopted these formats continue to produce their own devices based on the potential standards.

The transmission range can be up to feet or more depending on the product. The transmission range tops out at about 60 feet but decreases or becomes non-effective when transmitting through walls. Results are best if the transmitter and receiver are within line-of-sight. Both of these options make it more convenient to connect HDMI sources and TVs or video projectors without an unsightly cable.

However, as with traditional wired HDMI connectivity, there can be quirks such as distance, line-of-site issues, and interference when located near a wireless router or similar device depending on whether you use WHDI or WiHD. There are also differences in how both methods may be implemented on a brand and model level, such as whether some surround sound formats and 3D can be accommodated. Many wireless HDMI transmitters and receivers aren’t 4K compatible but are available on a growing number of units.

If you need 4K compatibility, check product features and specs to make sure it is provided. HDMI is the main connection used in home theater, and it is not going away anytime soon. On the positive side, HDMI provides the ability to transfer HD and 4K video and required audio formats from source components to home theater receivers and video displays. However, despite its widespread adoption, HDMI isn’t trouble-free.

One of its weaknesses is its inability to transfer video signals over long distances without additional support. Still, wireless alternatives are viable for home use. If you set up a home theater system with a long distance between the HDMI connected components, and the components don’t work, consider the options discussed above as possible solutions. Costs to implement each solution can vary, so take stock of your specific needs and which option will meet those needs within your budget.

When you visit this site, it may store or retrieve information on your browser, mostly in the form of cookies. Cookies collect information about your preferences and your device and are used to make the site work as you expect it to, to understand how you interact with the site, and to show advertisements that are targeted to your interests.

You can find out more and change our default settings with Cookie Settings. By Robert Silva. Robert Silva. Robert Silva has extensive experience in consumer electronics and home theater product sales and sales supervision; he has written about audio, video, and home theater topics since Robert has articles published on HBO. Tweet Share Email. What to Know Wired solution: use Ethernet cables to connect devices to an internet router. Wireless solution: connect an HDMI cable to the output of the device and to an external transmitter.

Was this page helpful? Thanks for letting us know! Email Address Sign up There was an error. Please try again. You’re in! Thanks for signing up. There was an error. Tell us why! More from Lifewire.

Can you extend display with hdmi –

A docking station is a great way to add additional ports to your laptop, including ports for external monitors. By using a splitter on your Windows laptop, you could even connect a total of three 4K monitors. Other laptop docking stations feature similar options. Even if your PC or laptop graphics card only supports a single output port, you can still extend your system with a second display using a USB-powered monitor and DisplayLink software.

Find an external display that’s USB-powered, plug it in, and install free DisplayLink software to make it all work. Once you have one or more external displays connected and detected by your computer, click on either of the detected monitors to configure it:. To display different things on two or more displays, you need to extend your screen to the other monitors.

If you want to close your laptop’s lid, but still use your external monitor, for example, to watch a movie, you have to change your laptop’s power options, which are hidden in the Windows 10 Control Panel.

As you can see, there are a lot of steps in the process where some people would give up and conclude that it just doesn’t work. If that’s still you, consider getting a larger monitor. But really, it comes down to just making sure your video card is capable of doing this, and then playing around with those display settings and making sure that the monitors are configured correctly.

If you have one DisplayPort, consider the daisy-chain option. Here’s what you need to consider when you want to use extra displays with your computer: Does your computer support dual monitors? Is your video card capable of more than one monitor? Have you set up your dual monitors correctly? Step 1: Check What Ports Are Available Before you start shoving wires into ports in the back of your PC or the sides of your laptop, stop and take a closer look at those ports so that you know what you’re looking at.

Many older computers have one of several configurations of the DVI port. HDMI Splitter can help you extend the display to more than one external monitor simultaneously.

However, you should note that each of those external monitors will display the same extended display. The best way to visualize the concept is as follows. The HDMI splitter receives an extended display from your computer and further shares the same signal to every external monitor connected to it. We recommend that you use monitors with equal resolutions whenever you are using an HDMI splitter.

For instance, if you connect a p monitor and 4k monitor to an HDMI splitter, both monitors will receive p video quality. If you notice that the display on the external monitors is blurry or stretched, then you have to adjust the resolution. Kindly follow these steps to adjust the resolution. Your computer will prompt you to choose a display. Choose the appropriate display and open the resolution dropdown. Either increase or decrease the resolution until the display on the external monitors appears normally.

Save the changes and test the new resolution with various images and texts. You will see all the available resolutions for the external monitors when you do this. Choose these resolutions one after another until the external monitors display normally. It usually takes just a few minutes to add additional monitors to computers. Here are the things you need to do in order to extend the display with an HDMI splitter:. The first thing you need to do while your computer and external monitor are turned off is to set up the connection.

This means you can have triple monitors that can extend your display. A splitter can split the image into two duplicates but can never extend the image. To do this, you need an adapter. But, if you are looking for a stationary solution, maybe a USB docking station with access to multiple ports is a better option. With the right hardware, you can easily set up your monitors exactly the way you want them.

Just a little understanding of what all these technologies do can really help when it comes time to purchase hardware. The HDMI splitter allows you to extend your display to two monitors. This is useful if you have a laptop that has only one monitor port and want to use it as a second monitor. Now you can watch movies on your laptop while using the TV as a secondary screen.

You cannot extend your display to two screens. If you are trying to do this, you may need to buy a different device. Today I was searching some website related to tech and when I did some query related to tech, I clicked on some website and read their blogs but I didn’t get that much related I clicked on your website then I liked your blogs very much. Today I was searching related blogs from some tech blogs on yandex and when I went to some website and saw their blog but I could not find the blogs I wanted and went to another website I also saw their blog but I His blog was not good and when I came to your website and saw your blogs, I liked your blog very much.

Is this one good? Please pay a visit to the websites we comply with, which includes this 1, as it represents our picks through the web. Click here to cancel reply. Campbell Smith Saturday 23rd of April Razvan Thursday 27th of January Google Wednesday 5th of January

– Can you extend display with hdmi

 
Answer is no. HDMI does not support extending you workspace across multiple monitors. Only mirroring the same image. David’s example is not an HDMI splitter, it is a DVI splitter, which assumes you have a DVI output on your video card. HDMI and DVI are 2 entirely different types of video device. Features: PERFORMANCE: USB to Dual HDMI adapter lets you extend your desktop by adding up to two HDMI monitors to your laptop or desktop computer using a single USB Type-A port | 1x output for up to 4K 30Hz (UHD) & 1x p | 2ch audio (through HDMI) | HDCP You will see three displays. Display 1 as a laptop screen, display 2 and 3 as external monitors. Click on display 2 and click on multiple displays. Choose Extend Desktop to this Display> Apply. This will not duplicate the content on all screen displays but you can see different content on all three. Repeat the same with display 3 as well. Click OK and you are done.

Can you extend display with hdmi –

 
 
An HDMI splitter can’t extend the display to two monitors. What a splitter does is mirror the original image to 2 or more displays. A USB-to-. Answer is no. HDMI does not support extending you workspace across multiple monitors. Only mirroring the same image. David’s example is not an HDMI splitter, it.